# Bots out of your SurveyMonkey survey, before they reach your data.

- Checks people before they reach your SurveyMonkey survey
- Each flag matched to a SurveyMonkey response
- Set up with you on a short call

In SurveyMonkey, bots and careless answers show up in Start Date and End Date, repeat IP addresses and Response quality flags like speeding and copy-pasted answers, which SurveyMonkey adds for English surveys on some paid plans. Its help describes no bot check, so Dot, the checker in SampleLabs Protect, adds a check page in front of your survey: a bot trap, Cloudflare's invisible check, duplicates, countries and an attention question. Each visit carries Dot's ID into a custom variable, so every flag matches a response. We set it up with you on a short call, and Dot can't read the answers inside SurveyMonkey.

Facts about SurveyMonkey checked on 22 November 2026.

Set it up on a short call: https://calendly.com/surveyswap/sample

## What bad responses look like in SurveyMonkey

| Signal | What SurveyMonkey shows | What Dot does |
| --- | --- | --- |
| Bots and scripts | SurveyMonkey's help describes no CAPTCHA or bot check. Response quality flags careless-looking answers on some paid plans. | Runs a hidden bot trap, Cloudflare's invisible check and a look at how the pointer moves, on the check page before your survey opens. |
| Rushing | Start Date and End Date in the export, so you can work out each response's time. Response quality flags speeding. | Marks anyone who clears the check page impossibly fast. Dot doesn't time your survey itself, so keep an eye on your own timings there too. |
| Repeat entries | Multiple Responses is off on most collectors and tracked by cookie, so another browser or device gets round it. IP Address shows in the export if IP tracking is on. | Spots a second visit from the same browser or IP address. With Turn them away, it never reaches your survey. |
| Not reading the questions | Response quality flags straightlining and matrix patterns. An attention question with one right answer is yours to add. | Asks one check question on the check page, like "Pick Disagree for this one.", and gives you check questions and scoring rules to add inside your survey. |
| Answers from the wrong country | IP Address in the export when IP tracking is on, and IP Restrictions to allow or block the addresses you list. | Checks where each visit comes from against the countries you pick, and can flag local hours and a timezone that don't match. |
| AI-written open answers | Response quality flags copy-pasted answers and gibberish, in English surveys on some paid plans. | Not on a survey built elsewhere, because Dot never sees the answers. On a survey built in SampleLabs, Dot reads every open answer for pasted and AI-written text. |

## What SurveyMonkey does itself

SurveyMonkey's checks sit in two places: collector options that decide who can answer, and Response quality, which reads the answers afterwards. SurveyMonkey says some collector options aren't on every plan.

- **Multiple Responses.** Off by default on most collectors, which allows one response per browser using a cookie. On a Web Link you can also allow one completed response per custom variable value.
- **IP Restrictions.** Allow or block specific IP addresses from opening your survey.
- **Password and sign-in.** Password protection, or Respondent Authentication through your company's own login.
- **Response quality.** Machine learning that flags speeding, straightlining, matrix patterns, gibberish, copy-pasted answers and more. It's on by default for English surveys on some paid plans, needs complete responses, and isn't available when you use a third-party panel redirect.

## What Dot adds

- **Checks before anyone starts.** The check page runs before your survey opens, so with Turn them away a bot or a repeat visitor never adds a response you have to find and delete later.
- **More than a score.** A trap only bots fall into, Cloudflare's invisible check, how the pointer moves, where the visit comes from and whether the same browser or IP address came before.
- **A reason for every flag.** Each visit shows what Dot saw, like "Clicked by a script" or "Failed attention check", so you decide what to exclude.
- **One set of checks for every tool.** Run surveys in more than one tool? Each one gets the same checks, and you see every visit in one place.

## How the setup works

1. **Book a short setup call.** We go through your survey with you and pick the checks: bot trap, rushed answers, duplicates, countries and the attention question.
2. **Choose what happens to a flagged person.** Flag only sends everyone on to your survey and marks the visit. Turn them away sends flagged people to Dot's end page, or to your panel's screen-out link.
3. **Catch Dot's ID in SurveyMonkey.** Add a custom variable called sl_id to your Web Link collector. SurveyMonkey saves it with each response. Custom variables are a paid feature.
4. **Share Dot's link instead of your survey's own.** People pass the check page first, then go straight on to your survey. You see every visit in Protect, with its flags and its ID.

## Questions people ask

### How do I find bots in my SurveyMonkey responses?

Export your responses with IP tracking on and look at Start Date and End Date together: responses finished far faster than the rest, many from one IP Address, or open answers that don't fit the question. On plans that have it, Response quality flags some of these for you. To stop bots before they start, put Dot's check page in front of the survey with Protect. https://samplelabs.io/protect

### Does SurveyMonkey have bot protection?

SurveyMonkey's help describes no CAPTCHA or bot check. Its protection is in collector options like Multiple Responses, IP Restrictions and passwords, plus Response quality, which flags careless answers on some paid plans.

### How do I stop people taking my SurveyMonkey survey twice?

Keep Multiple Responses off, which allows one response per browser by cookie. Someone in a different browser or on another device can still answer again. Dot checks both the browser and the IP address before your survey opens.

### Does SurveyMonkey Response quality work with panel respondents?

Not when you use a third-party panel redirect, SurveyMonkey says. Dot's check page works with any panel, and flagged people can go back to the panel's screen-out link.

### How does Dot work with a SurveyMonkey survey?

You share Dot's link instead of your survey's. Each person passes a short check page first: the bot trap, Cloudflare's invisible check, duplicates, countries and, if you want it, an attention question. Then Dot sends them on to your survey with its ID in the link, or turns them away. https://samplelabs.io/protect

### Do I need a call to set up Dot on SurveyMonkey?

Yes, a short one. We go through your survey with you, pick the checks, decide what happens to flagged people and add the sl_id custom variable to your Web Link collector, so every flag matches a response. You can change your choices later in Protect.

### Can Dot check AI-written answers in my SurveyMonkey survey?

No. Dot only sees its own check page, never the answers people give inside SurveyMonkey. SurveyMonkey's Response quality does flag copy-pasted answers on plans that have it. If you build the survey in SampleLabs, Dot reads every open answer for pasted and AI-written text. https://samplelabs.io/build

### How do I match Dot's flags to my SurveyMonkey responses?

Add a custom variable called sl_id to your Web Link collector. Dot puts its ID in the link, SurveyMonkey saves it at the end of each row in your export, and the same ID shows next to each visit in Protect. Custom variables are a paid SurveyMonkey feature.

### Can I send flagged people back to my panel?

Yes. With Turn them away, choose your own link and paste the panel's screen-out link, so the panel knows the person didn't take part. Or send them to Dot's end page.

### What does Dot cost on a survey built elsewhere?

You pay for each person Dot checks, billed monthly by card before VAT: $0.05 each for the first 20,000 a month, and less after that. Your first 10 checks each month are free, with no card needed. Surveys built in SampleLabs are protected on every Build plan. https://samplelabs.io/build

## Where these facts come from

Every fact about a survey tool on this page comes from its own help pages. Tools change, so check the date. Spotted something out of date? Email hello@samplelabs.io and we'll fix it.

- [SurveyMonkey Help: Collector options](https://help.surveymonkey.com/en/surveymonkey/send/collector-options/)
- [SurveyMonkey Help: Allowing multiple responses](https://help.surveymonkey.com/en/surveymonkey/send/allowing-multiple-responses/)
- [SurveyMonkey Help: Response quality](https://help.surveymonkey.com/en/surveymonkey/analyze/response-quality/)
- [SurveyMonkey Help: XLS exports](https://help.surveymonkey.com/en/surveymonkey/analyze/xls-exports/)
- [SurveyMonkey Help: Custom variables](https://help.surveymonkey.com/en/surveymonkey/send/custom-variables/)

## Other survey tools

- [Protect your Qualtrics survey](https://samplelabs.io/protect/qualtrics)
- [Protect your Google Forms survey](https://samplelabs.io/protect/google-forms)
- [Protect your Typeform survey](https://samplelabs.io/protect/typeform)
- [Protect your Alchemer survey](https://samplelabs.io/protect/alchemer)
